Repository navigation
Missing SSP2 (I2S) from Up Xtreme WHL-I5 #3624
Description
Activity
@lucastanure the skylake driver shouldn't be used on this board, you should be using the SOF driver. I am not sure how you ended-up with this driver. Did you use a kernel parameter for the snd-intel-dspcfg module?
Also remember that you have to use one of the "Advanced Audio Modes" in the BIOS menu. in the AAM config3, I see the following mapping for SSP0 (aka I2S1).
I2S1_FRM pin 10 I2S_MCLK pin 16 I2S1_RXD pin 18 I2S1_TXD pin 24 I2S1_SCLK pin 32Well, Is the driver that probes with BIOS v1.9.
Here it is the dmesg and config:
https://pastebin.com/2eFvF9SYThe kernel command line is:
BOOT_IMAGE=/vmlinuz-linux-tanureal root=UUID=4062442e-4588-405d-9e44-61764df0d079 rw loglevel=8 audit=0What I am missing in my kernel?
How can this kernel probe the wrong driver?Thanks
LucasJust confirm here I need SSP2 on normal HAT mode. Which uses SDIN and SDOUT on pins 38 and 40 for the 40 pins header.
please enable dynamic debug by copying this file
sof-dyndbg.conf.txt
as /etc/modprobe.d/sof-dyndbg.conf, reboot and retry.I don't get why you have different results on a platform we use for every PR...
[ 0.000000] microcode: microcode updated early to revision 0xec, date = 2021-04-28
[ 0.000000] Linux version 5.18.0-rc5-tanureal-00021-g2779a3961023-dirty (linux-tanureal@archlinux) (gcc (GCC) 11.2.0, GNU ld (GNU Binutils) 2.38) #10 SMP PREEMPT_DYNAMIC Mon, 02 May 2022 10:41:10 +0000
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-tanureal root=UUID=4062442e-4588-405d-9e44-61764df0d079 rw loglevel=8 audit=0
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] signal: max sigframe size: 2032
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007c877fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007c878000-0x000000007f4c0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f4c1000-0x000000007f53dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007f53e000-0x000000007f5eefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f5ef000-0x000000007fc72fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007fc73000-0x000000007fd0dfff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007fd0e000-0x000000007fd0efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fd0f000-0x000000008affffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000270ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.70 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0x7f4da000 ACPI=0x7f4da000 SMBIOS=0x7faca000 SMBIOS 3.0=0x7fac9000 MEMATTR=0x78f92018
[ 0.000000] SMBIOS 3.2.0 present.
[ 0.000000] DMI: AAEON UP-WHL01/UP-WHL01, BIOS UPW1AM19 11/10/2020
[ 0.000000] tsc: Detected 1800.000 MHz processor
[ 0.000011] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000016] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000026] last_pfn = 0x271000 max_arch_pfn = 0x400000000
[ 0.000217] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002020] e820: update [mem 0x88800000-0xffffffff] usable ==> reserved
[ 0.002032] last_pfn = 0x7fd0f max_arch_pfn = 0x400000000
[ 0.013974] Using GB pages for direct mapping
[ 0.014353] Secure boot disabled
[ 0.014355] RAMDISK: [mem 0x3664b000-0x3731cfff]
[ 0.014362] ACPI: Early table checksum verification disabled
[ 0.014366] ACPI: RSDP 0x000000007F4DA000 000024 (v02 ALASKA)
[ 0.014372] ACPI: XSDT 0x000000007F4DA0B0 0000E4 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.014381] ACPI: FACP 0x000000007F516A60 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.014389] ACPI: Override [DSDT- A M I ], this is unsafe: tainting kernel
[ 0.014392] Disabling lock debugging due to kernel taint
[ 0.014394] ACPI: DSDT 0x000000007F4DA228 Logical table override, new table: 0xFFFFFFFFA0948280
[ 0.014398] ACPI: DSDT 0xFFFFFFFFA0948280 03C840 (v02 ALASKA A M I 01072009 INTL 20220331)
[ 0.014404] ACPI: FACS 0x000000007F5EE080 000040
[ 0.014408] ACPI: APIC 0x000000007F516B78 0000BC (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.014413] ACPI: FPDT 0x000000007F516C38 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.014418] ACPI: FIDT 0x000000007F516C80 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.014423] ACPI: MCFG 0x000000007F516D20 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.014427] ACPI: SSDT 0x000000007F516D60 001B5F (v02 CpuRef CpuSsdt 00003000 INTL 20160527)
[ 0.014433] ACPI: SSDT 0x000000007F5188C0 0031C6 (v02 SaSsdt SaSsdt 00003000 INTL 20160527)
[ 0.014437] ACPI: HPET 0x000000007F51BA88 000038 (v01 ALASKA A M I 00000002 01000013)
[ 0.014442] ACPI: SSDT 0x000000007F51BAC0 0000B5 (v01 AAEON ADC081C 00000001 INTL 20160527)
[ 0.014447] ACPI: SSDT 0x000000007F51BB78 000806 (v01 AAEON PINCTRL 00000002 INTL 20160527)
[ 0.014452] ACPI: SSDT 0x000000007F51C380 0030C0 (v02 ALASKA CnlU_Rvp 00001000 INTL 20160527)
[ 0.014457] ACPI: SSDT 0x000000007F51F440 000FAE (v02 ALASKA Ther_Rvp 00001000 INTL 20160527)
[ 0.014462] ACPI: SSDT 0x000000007F5203F0 003048 (v02 INTEL xh_whld4 00000000 INTL 20160527)
[ 0.014467] ACPI: UEFI 0x000000007F523438 000042 (v01 ALASKA A M I 00000002 01000013)
[ 0.014472] ACPI: LPIT 0x000000007F523480 000094 (v01 ALASKA A M I 00000002 01000013)
[ 0.014477] ACPI: SSDT 0x000000007F523518 0027DE (v02 ALASKA PtidDevc 00001000 INTL 20160527)
[ 0.014482] ACPI: SSDT 0x000000007F525CF8 0014E2 (v02 ALASKA TbtTypeC 00000000 INTL 20160527)
[ 0.014487] ACPI: DBGP 0x000000007F5271E0 000034 (v01 ALASKA A M I 00000002 01000013)
[ 0.014491] ACPI: DBG2 0x000000007F527218 000054 (v00 ALASKA A M I 00000002 01000013)
[ 0.014496] ACPI: SSDT 0x000000007F527270 001B67 (v02 ALASKA UsbCTabl 00001000 INTL 20160527)
[ 0.014501] ACPI: DMAR 0x000000007F528DD8 0000C8 (v01 INTEL EDK2 00000002 01000013)
[ 0.014506] ACPI: SSDT 0x000000007F528EA0 000144 (v02 Intel ADebTabl 00001000 INTL 20160527)
[ 0.014511] ACPI: ASF! 0x000000007F528FE8 000074 (v32 ALASKA A M I 00000002 01000013)
[ 0.014516] ACPI: WSMT 0x000000007F529060 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.014521] ACPI: Reserving FACP table memory at [mem 0x7f516a60-0x7f516b73]
[ 0.014523] ACPI: Reserving DSDT table memory at [mem 0xffffffffa0948280-0xffffffffa0984abf]
[ 0.014526] ACPI: Reserving FACS table memory at [mem 0x7f5ee080-0x7f5ee0bf]
[ 0.014528] ACPI: Reserving APIC table memory at [mem 0x7f516b78-0x7f516c33]
[ 0.014530] ACPI: Reserving FPDT table memory at [mem 0x7f516c38-0x7f516c7b]
[ 0.014532] ACPI: Reserving FIDT table memory at [mem 0x7f516c80-0x7f516d1b]
[ 0.014534] ACPI: Reserving MCFG table memory at [mem 0x7f516d20-0x7f516d5b]
[ 0.014535] ACPI: Reserving SSDT table memory at [mem 0x7f516d60-0x7f5188be]
[ 0.014537] ACPI: Reserving SSDT table memory at [mem 0x7f5188c0-0x7f51ba85]
[ 0.014539] ACPI: Reserving HPET table memory at [mem 0x7f51ba88-0x7f51babf]
[ 0.014541] ACPI: Reserving SSDT table memory at [mem 0x7f51bac0-0x7f51bb74]
[ 0.014543] ACPI: Reserving SSDT table memory at [mem 0x7f51bb78-0x7f51c37d]
[ 0.014545] ACPI: Reserving SSDT table memory at [mem 0x7f51c380-0x7f51f43f]
[ 0.014547] ACPI: Reserving SSDT table memory at [mem 0x7f51f440-0x7f5203ed]
[ 0.014549] ACPI: Reserving SSDT table memory at [mem 0x7f5203f0-0x7f523437]
[ 0.014550] ACPI: Reserving UEFI table memory at [mem 0x7f523438-0x7f523479]
[ 0.014552] ACPI: Reserving LPIT table memory at [mem 0x7f523480-0x7f523513]
[ 0.014554] ACPI: Reserving SSDT table memory at [mem 0x7f523518-0x7f525cf5]
[ 0.014556] ACPI: Reserving SSDT table memory at [mem 0x7f525cf8-0x7f5271d9]
[ 0.014558] ACPI: Reserving DBGP table memory at [mem 0x7f5271e0-0x7f527213]
[ 0.014560] ACPI: Reserving DBG2 table memory at [mem 0x7f527218-0x7f52726b]
[ 0.014562] ACPI: Reserving SSDT table memory at [mem 0x7f527270-0x7f528dd6]
[ 0.014564] ACPI: Reserving DMAR table memory at [mem 0x7f528dd8-0x7f528e9f]
[ 0.014566] ACPI: Reserving SSDT table memory at [mem 0x7f528ea0-0x7f528fe3]
[ 0.014568] ACPI: Reserving ASF! table memory at [mem 0x7f528fe8-0x7f52905b]
[ 0.014570] ACPI: Reserving WSMT table memory at [mem 0x7f529060-0x7f529087]
[ 0.014777] No NUMA configuration found
[ 0.014779] Faking a node at [mem 0x0000000000000000-0x0000000270ffffff]
[ 0.014785] NODE_DATA(0) allocated [mem 0x270ffa000-0x270ffdfff]
[ 0.014819] Zone ranges:
[ 0.014821] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.014825] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.014827] Normal [mem 0x0000000100000000-0x0000000270ffffff]
[ 0.014830] Device empty
[ 0.014832] Movable zone start for each node
[ 0.014834] Early memory node ranges
[ 0.014835] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.014838] node 0: [mem 0x0000000000100000-0x000000007c877fff]
[ 0.014840] node 0: [mem 0x000000007fd0e000-0x000000007fd0efff]
[ 0.014842] node 0: [mem 0x0000000100000000-0x0000000270ffffff]
[ 0.014845] Initmem setup node 0 [mem 0x0000000000001000-0x0000000270ffffff]
[ 0.014851] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.014884] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.019003] On node 0, zone DMA32: 13462 pages in unavailable ranges
[ 0.030445] On node 0, zone Normal: 753 pages in unavailable ranges
[ 0.030947] On node 0, zone Normal: 28672 pages in unavailable ranges
[ 0.030964] Reserving Intel graphics memory at [mem 0x89000000-0x8affffff]
[ 0.031234] ACPI: PM-Timer IO Port: 0x1808
[ 0.031243] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.031246] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.031248] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.031250] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.031252] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.031253] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.031255] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.031256] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.031314] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.031319] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.031322] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.031328] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.031330] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.031334] TSC deadline timer available
[ 0.031336] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.031362] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.031366] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.031369] PM: hibernation: Registered nosave memory: [mem 0x7c878000-0x7f4c0fff]
[ 0.031371] PM: hibernation: Registered nosave memory: [mem 0x7f4c1000-0x7f53dfff]
[ 0.031372] PM: hibernation: Registered nosave memory: [mem 0x7f53e000-0x7f5eefff]
[ 0.031374] PM: hibernation: Registered nosave memory: [mem 0x7f5ef000-0x7fc72fff]
[ 0.031376] PM: hibernation: Registered nosave memory: [mem 0x7fc73000-0x7fd0dfff]
[ 0.031379] PM: hibernation: Registered nosave memory: [mem 0x7fd0f000-0x8affffff]
[ 0.031380] PM: hibernation: Registered nosave memory: [mem 0x8b000000-0xdfffffff]
[ 0.031382] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.031383] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.031385] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.031386] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.031388] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.031389] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.031391] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.031393] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfedfffff]
[ 0.031394] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.031396] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.031397] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.031400] [mem 0x8b000000-0xdfffffff] available for PCI devices
[ 0.031402] Booting paravirtualized kernel on bare hardware
[ 0.031406] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.038937] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[ 0.039198] percpu: Embedded 62 pages/cpu s217088 r8192 d28672 u262144
[ 0.039209] pcpu-alloc: s217088 r8192 d28672 u262144 alloc=1*2097152
[ 0.039213] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.039244] Fallback order for Node 0: 0
[ 0.039249] Built 1 zonelists, mobility grouping on. Total pages: 1989655
[ 0.039252] Policy zone: Normal
[ 0.039254] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-tanureal root=UUID=4062442e-4588-405d-9e44-61764df0d079 rw loglevel=8 audit=0
[ 0.039326] audit: disabled (until reboot)
[ 0.039329] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux-tanureal", will be passed to user space.
[ 0.039923] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.040219] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.040468] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
[ 0.071687] Memory: 7794260K/8085596K available (14342K kernel code, 2295K rwdata, 4644K rodata, 1768K init, 3808K bss, 291076K reserved, 0K cma-reserved)
[ 0.071696] random: get_random_u64 called from __kmem_cache_create+0x2a/0x4f0 with crng_init=0
[ 0.071900] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.071921] ftrace: allocating 43950 entries in 172 pages
[ 0.083133] ftrace: allocated 172 pages with 4 groups
[ 0.083223] Dynamic Preempt: full
[ 0.083267] rcu: Preemptible hierarchical RCU implementation.
[ 0.083268] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ 0.083271] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.083273] Trampoline variant of Tasks RCU enabled.
[ 0.083274] Rude variant of Tasks RCU enabled.
[ 0.083276] Tracing variant of Tasks RCU enabled.
[ 0.083277] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.083279] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.089725] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[ 0.090290] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval)
[ 0.090331] random: crng init done (trusting CPU's manufacturer)
[ 0.090369] Console: colour dummy device 80x25
[ 0.090858] printk: console [tty0] enabled
[ 0.090887] ACPI: Core revision 20211217
[ 0.090893] ACPI Error: Table [DSDT] is not invalidated during early boot stage (20211217/tbxface-163)
[ 0.091560] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.091701] APIC: Switch to symmetric I/O mode setup
[ 0.091706] DMAR: Host address width 39
[ 0.091709] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.091719] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.091726] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.091733] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.091738] DMAR: RMRR base: 0x0000007f85a000 end: 0x0000007faa3fff
[ 0.091743] DMAR: RMRR base: 0x00000088800000 end: 0x0000008affffff
[ 0.091746] DMAR: RMRR base: 0x0000007f441000 end: 0x0000007f4c0fff
[ 0.091751] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.091756] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.091759] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.094043] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.094049] x2apic enabled
[ 0.094085] Switched APIC routing to cluster x2apic.
[ 0.099822] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.114986] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns
[ 0.114996] Calibrating delay loop (skipped), value calculated using timer frequency.. 3601.00 BogoMIPS (lpj=6000000)
[ 0.115003] pid_max: default: 32768 minimum: 301
[ 0.117174] LSM: Security Framework initializing
[ 0.117185] landlock: Up and running.
[ 0.117188] Yama: becoming mindful.
[ 0.117198] LSM support for eBPF active
[ 0.117236] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.117257] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.117557] CPU0: Thermal monitoring enabled (TM1)
[ 0.117642] process: using mwait in idle threads
[ 0.117646] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.117649] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.117659] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.117664] Spectre V2 : Mitigation: Enhanced IBRS
[ 0.117667] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.117671] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.117676] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.117679] TAA: Mitigation: TSX disabled
[ 0.117683] SRBDS: Mitigation: TSX disabled
[ 0.124846] Freeing SMP alternatives memory: 36K
[ 0.125079] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 2218
[ 0.125108] smpboot: CPU0: Intel(R) Core(TM) i5-8365UE CPU @ 1.60GHz (family: 0x6, model: 0x8e, stepping: 0xc)
[ 0.125253] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.125258] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.125293] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.125311] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.125326] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.125357] ... version: 4
[ 0.125359] ... bit width: 48
[ 0.125361] ... generic registers: 4
[ 0.125363] ... value mask: 0000ffffffffffff
[ 0.125366] ... max period: 00007fffffffffff
[ 0.125369] ... fixed-purpose events: 3
[ 0.125371] ... event mask: 000000070000000f
[ 0.125504] rcu: Hierarchical SRCU implementation.
[ 0.126029] smp: Bringing up secondary CPUs ...
[ 0.126142] x86: Booting SMP configuration:
[ 0.126145] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.142657] smp: Brought up 1 node, 8 CPUs
[ 0.142657] smpboot: Max logical packages: 1
[ 0.142657] smpboot: Total of 8 processors activated (28811.00 BogoMIPS)
[ 0.145417] devtmpfs: initialized
[ 0.145417] x86/mm: Memory block size: 128MB
[ 0.145961] ACPI: PM: Registering ACPI NVS region [mem 0x7f53e000-0x7f5eefff] (724992 bytes)
[ 0.145961] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.145961] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.145961] pinctrl core: initialized pinctrl subsystem
[ 0.145961] PM: RTC time: 10:43:41, date: 2022-05-02
[ 0.146026] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.146288] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.146401] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.146512] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.146641] thermal_sys: Registered thermal governor 'fair_share'
[ 0.146643] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.146647] thermal_sys: Registered thermal governor 'step_wise'
[ 0.146650] thermal_sys: Registered thermal governor 'user_space'
[ 0.146653] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.146680] cpuidle: using governor ladder
[ 0.148339] cpuidle: using governor menu
[ 0.148370] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.148455] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.148465] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.148492] PCI: Using configuration type 1 for base access
[ 0.148848] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.150374] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.150393] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.150393] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.151701] fbcon: Taking over console
[ 0.151730] ACPI: Added _OSI(Module Device)
[ 0.151734] ACPI: Added _OSI(Processor Device)
[ 0.151737] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.151740] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.151743] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.151746] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.151750] ACPI: Added OSI(Linux-HPI-Hybrid-Graphics)
[ 0.264056] ACPI: 12 ACPI AML tables successfully acquired and loaded
[ 0.273575] ACPI: Dynamic OEM Table Load:
[ 0.273587] ACPI: SSDT 0xFFFF8C8000E2E200 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20160527)
[ 0.275211] ACPI: _SB.PR00: _OSC native thermal LVT Acked
[ 0.278051] ACPI: Dynamic OEM Table Load:
[ 0.278063] ACPI: SSDT 0xFFFF8C8000EA2000 0004FD (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
[ 0.279956] ACPI: Dynamic OEM Table Load:
[ 0.279966] ACPI: SSDT 0xFFFF8C80010A3600 000149 (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
[ 0.281590] ACPI: Dynamic OEM Table Load:
[ 0.281600] ACPI: SSDT 0xFFFF8C8000EA5800 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527)
[ 0.283672] ACPI: Dynamic OEM Table Load:
[ 0.283684] ACPI: SSDT 0xFFFF8C8000EA0800 0005FC (v02 PmRef ApIst 00003000 INTL 20160527)
[ 0.285599] ACPI: Dynamic OEM Table Load:
[ 0.285609] ACPI: SSDT 0xFFFF8C8001095800 000317 (v02 PmRef ApHwp 00003000 INTL 20160527)
[ 0.287509] ACPI: Dynamic OEM Table Load:
[ 0.287519] ACPI: SSDT 0xFFFF8C8000127000 000AB0 (v02 PmRef ApPsd 00003000 INTL 20160527)
[ 0.297927] ACPI: Interpreter enabled
[ 0.297993] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.297997] ACPI: Using IOAPIC for interrupt routing
[ 0.298058] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.300162] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.308750] ACPI: PM: Power Resource [PXP]
[ 0.310547] ACPI: PM: Power Resource [PXP]
[ 0.321893] ACPI: PM: Power Resource [USBC]
[ 0.322281] ACPI: PM: Power Resource [PAUD]
[ 0.326980] ACPI: PM: Power Resource [V0PR]
[ 0.327704] ACPI: PM: Power Resource [V1PR]
[ 0.328422] ACPI: PM: Power Resource [V2PR]
[ 0.334139] ACPI: PM: Power Resource [PXTC]
[ 0.338910] ACPI: PM: Power Resource [WRST]
[ 0.344272] ACPI: PM: Power Resource [FN00]
[ 0.344396] ACPI: PM: Power Resource [FN01]
[ 0.344511] ACPI: PM: Power Resource [FN02]
[ 0.344626] ACPI: PM: Power Resource [FN03]
[ 0.344739] ACPI: PM: Power Resource [FN04]
[ 0.345544] ACPI: PM: Power Resource [PIN]
[ 0.346311] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.346324] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.349341] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ 0.350708] PCI host bridge to bus 0000:00
[ 0.350713] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.350718] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.350722] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.350726] pci_bus 0000:00: root bus resource [mem 0x8b000000-0xdfffffff window]
[ 0.350730] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[ 0.350734] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.350866] pci 0000:00:00.0: [8086:3e34] type 00 class 0x060000
[ 0.350971] pci 0000:00:02.0: [8086:3ea0] type 00 class 0x030000
[ 0.350986] pci 0000:00:02.0: reg 0x10: [mem 0x8b000000-0x8bffffff 64bit]
[ 0.350996] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.351004] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.351031] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.351280] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.351295] pci 0000:00:04.0: reg 0x10: [mem 0x8c230000-0x8c237fff 64bit]
[ 0.351725] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[ 0.351742] pci 0000:00:08.0: reg 0x10: [mem 0x8c24c000-0x8c24cfff 64bit]
[ 0.351891] pci 0000:00:12.0: [8086:9df9] type 00 class 0x118000
[ 0.351912] pci 0000:00:12.0: reg 0x10: [mem 0x8c24b000-0x8c24bfff 64bit]
[ 0.352065] pci 0000:00:13.0: [8086:9dfc] type 00 class 0x070000
[ 0.352089] pci 0000:00:13.0: reg 0x10: [mem 0x8c240000-0x8c241fff 64bit]
[ 0.352171] pci 0000:00:13.0: PME# supported from D0 D3hot
[ 0.352909] pci 0000:00:14.0: [8086:9ded] type 00 class 0x0c0330
[ 0.352934] pci 0000:00:14.0: reg 0x10: [mem 0x8c220000-0x8c22ffff 64bit]
[ 0.353009] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.356005] pci 0000:00:14.2: [8086:9def] type 00 class 0x050000
[ 0.356029] pci 0000:00:14.2: reg 0x10: [mem 0x8c23e000-0x8c23ffff 64bit]
[ 0.356044] pci 0000:00:14.2: reg 0x18: [mem 0x8c24a000-0x8c24afff 64bit]
[ 0.356179] pci 0000:00:16.0: [8086:9de0] type 00 class 0x078000
[ 0.356203] pci 0000:00:16.0: reg 0x10: [mem 0x8c249000-0x8c249fff 64bit]
[ 0.356290] pci 0000:00:16.0: PME# supported from D3hot
[ 0.357037] pci 0000:00:16.3: [8086:9de3] type 00 class 0x070002
[ 0.357059] pci 0000:00:16.3: reg 0x10: [io 0x40a0-0x40a7]
[ 0.357071] pci 0000:00:16.3: reg 0x14: [mem 0x8c248000-0x8c248fff]
[ 0.357233] pci 0000:00:17.0: [8086:9dd3] type 00 class 0x010601
[ 0.357252] pci 0000:00:17.0: reg 0x10: [mem 0x8c23c000-0x8c23dfff]
[ 0.357263] pci 0000:00:17.0: reg 0x14: [mem 0x8c247000-0x8c2470ff]
[ 0.357274] pci 0000:00:17.0: reg 0x18: [io 0x4090-0x4097]
[ 0.357286] pci 0000:00:17.0: reg 0x1c: [io 0x4080-0x4083]
[ 0.357297] pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f]
[ 0.357308] pci 0000:00:17.0: reg 0x24: [mem 0x8c246000-0x8c2467ff]
[ 0.357359] pci 0000:00:17.0: PME# supported from D3hot
[ 0.357996] pci 0000:00:19.0: [8086:9dc5] type 00 class 0x0c8000
[ 0.358087] pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.358915] pci 0000:00:19.2: [8086:9dc7] type 00 class 0x078000
[ 0.359006] pci 0000:00:19.2: reg 0x10: [mem 0x8c244000-0x8c244fff 64bit]
[ 0.359759] pci 0000:00:1a.0: [8086:9dc4] type 00 class 0x080501
[ 0.359783] pci 0000:00:1a.0: reg 0x10: [mem 0x8c243000-0x8c243fff 64bit]
[ 0.363158] pci 0000:00:1d.0: [8086:9db6] type 01 class 0x060400
[ 0.363256] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.363285] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[ 0.364496] pci 0000:00:1f.0: [8086:9d84] type 00 class 0x060100
[ 0.365152] pci 0000:00:1f.3: [8086:9dc8] type 00 class 0x040300
[ 0.365207] pci 0000:00:1f.3: reg 0x10: [mem 0x8c238000-0x8c23bfff 64bit]
[ 0.365274] pci 0000:00:1f.3: reg 0x20: [mem 0x8c000000-0x8c0fffff 64bit]
[ 0.365406] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.371413] pci 0000:00:1f.4: [8086:9da3] type 00 class 0x0c0500
[ 0.371445] pci 0000:00:1f.4: reg 0x10: [mem 0x8c242000-0x8c2420ff 64bit]
[ 0.371478] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 0.371900] pci 0000:00:1f.5: [8086:9da4] type 00 class 0x0c8000
[ 0.371921] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ 0.372066] pci 0000:00:1f.6: [8086:15bd] type 00 class 0x020000
[ 0.372105] pci 0000:00:1f.6: reg 0x10: [mem 0x8c200000-0x8c21ffff]
[ 0.372302] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.372527] pci 0000:01:00.0: [8086:157b] type 00 class 0x020000
[ 0.372557] pci 0000:01:00.0: reg 0x10: [mem 0x8c100000-0x8c11ffff]
[ 0.372587] pci 0000:01:00.0: reg 0x18: [io 0x3000-0x301f]
[ 0.372604] pci 0000:01:00.0: reg 0x1c: [mem 0x8c120000-0x8c123fff]
[ 0.372758] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.372921] pci 0000:00:1d.0: PCI bridge to [bus 01]
[ 0.372927] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff]
[ 0.372932] pci 0000:00:1d.0: bridge window [mem 0x8c100000-0x8c1fffff]
[ 0.375761] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.375906] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[ 0.376048] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.376189] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.376329] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.376469] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.376612] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.376753] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.386689] iommu: Default domain type: Translated
[ 0.386694] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.386875] SCSI subsystem initialized
[ 0.386893] libata version 3.00 loaded.
[ 0.386893] ACPI: bus type USB registered
[ 0.386893] usbcore: registered new interface driver usbfs
[ 0.386893] usbcore: registered new interface driver hub
[ 0.386893] usbcore: registered new device driver usb
[ 0.386893] pps_core: LinuxPPS API ver. 1 registered
[ 0.386893] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.386893] PTP clock support registered
[ 0.386893] EDAC MC: Ver: 3.0.0
[ 0.386893] Registered efivars operations
[ 0.386893] NetLabel: Initializing
[ 0.386893] NetLabel: domain hash size = 128
[ 0.386893] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.386893] NetLabel: unlabeled traffic allowed by default
[ 0.386893] mctp: management component transport protocol core
[ 0.386893] NET: Registered PF_MCTP protocol family
[ 0.386893] PCI: Using ACPI for IRQ routing
[ 0.431675] PCI: pci_cache_line_size set to 64 bytes
[ 0.431843] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.431848] e820: reserve RAM buffer [mem 0x7c878000-0x7fffffff]
[ 0.431852] e820: reserve RAM buffer [mem 0x7fd0f000-0x7fffffff]
[ 0.431855] e820: reserve RAM buffer [mem 0x271000000-0x273ffffff]
[ 0.431874] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.431874] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.431874] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.431874] vgaarb: loaded
[ 0.433133] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.433145] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.436083] clocksource: Switched to clocksource tsc-early
[ 0.444631] VFS: Disk quotas dquot_6.6.0
[ 0.444654] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.444749] pnp: PnP ACPI init
[ 0.444908] system 00:00: [mem 0x40000000-0x403fffff] could not be reserved
[ 0.445284] system 00:01: [io 0x0a00-0x0a0f] has been reserved
[ 0.445291] system 00:01: [io 0x0a10-0x0a1f] has been reserved
[ 0.445896] pnp 00:02: [dma 0 disabled]
[ 0.446505] pnp 00:03: [dma 0 disabled]
[ 0.446720] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.446726] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.446918] system 00:05: [io 0x1854-0x1857] has been reserved
[ 0.447257] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.447263] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.447267] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.447271] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.447275] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.447279] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.447283] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.447287] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.447659] system 00:07: [io 0x1800-0x18fe] could not be reserved
[ 0.447665] system 00:07: [mem 0xfd000000-0xfd69ffff] has been reserved
[ 0.447669] system 00:07: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[ 0.447673] system 00:07: [mem 0xfd6f0000-0xfdffffff] has been reserved
[ 0.447677] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.447681] system 00:07: [mem 0xfe200000-0xfe7fffff] has been reserved
[ 0.447685] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.448183] system 00:08: [io 0x2000-0x20fe] has been reserved
[ 0.451675] pnp: PnP ACPI: found 10 devices
[ 0.457611] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.457694] NET: Registered PF_INET protocol family
[ 0.457813] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.459267] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.459326] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.459490] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.459590] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.459668] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.459715] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.459749] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.459809] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.459820] NET: Registered PF_XDP protocol family
[ 0.459838] pci 0000:00:19.0: BAR 0: assigned [mem 0x8c245000-0x8c245fff 64bit]
[ 0.459907] pci 0000:00:1d.0: PCI bridge to [bus 01]
[ 0.459912] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff]
[ 0.459918] pci 0000:00:1d.0: bridge window [mem 0x8c100000-0x8c1fffff]
[ 0.459927] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.459932] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.459935] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.459939] pci_bus 0000:00: resource 7 [mem 0x8b000000-0xdfffffff window]
[ 0.459943] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
[ 0.459946] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.459949] pci_bus 0000:01: resource 1 [mem 0x8c100000-0x8c1fffff]
[ 0.460686] PCI: CLS 64 bytes, default 64
[ 0.460710] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.460713] software IO TLB: mapped [mem 0x0000000071f18000-0x0000000075f18000] (64MB)
[ 0.460763] Unpacking initramfs...
[ 0.460792] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.460808] sgx: EPC section 0x80200000-0x85f7ffff
[ 0.462360] Initialise system trusted keyrings
[ 0.462377] Key type blacklist registered
[ 0.462426] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ 0.464120] zbud: loaded
[ 0.478565] Key type asymmetric registered
[ 0.478574] Asymmetric key parser 'x509' registered
[ 0.538999] Freeing initrd memory: 13128K
[ 0.541936] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[ 0.541969] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[ 0.542127] io scheduler mq-deadline registered
[ 0.542132] io scheduler kyber registered
[ 0.542178] io scheduler bfq registered
[ 0.545050] pcieport 0000:00:1d.0: PME: Signaling with IRQ 122
[ 0.545125] pcieport 0000:00:1d.0: AER: enabled with IRQ 122
[ 0.545168] pcieport 0000:00:1d.0: DPC: enabled with IRQ 122
[ 0.545172] pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[ 0.545288] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.546130] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.546167] ACPI: button: Sleep Button [SLPB]
[ 0.546205] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.546227] ACPI: button: Power Button [PWRB]
[ 0.546261] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.548415] ACPI: button: Power Button [PWRF]
[ 0.548756] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 2218
[ 0.551257] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.551264] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[ 0.551419] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.552043] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.555138] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.559428] serial 0000:00:16.3: enabling device (0001 -> 0003)
[ 0.560192] 0000:00:16.3: ttyS4 at I/O 0x40a0 (irq = 19, base_baud = 115200) is a 16550A
[ 0.560493] Non-volatile memory driver v1.3
[ 0.560497] Linux agpgart interface v0.103
[ 0.560500] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[ 0.560566] ACPI: bus type drm_connector registered
[ 0.561610] ahci 0000:00:17.0: version 3.0
[ 0.561900] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.561909] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds apst
[ 0.562394] scsi host0: ahci
[ 0.562542] scsi host1: ahci
[ 0.562588] ata1: SATA max UDMA/133 abar m2048@0x8c246000 port 0x8c246100 irq 123
[ 0.562595] ata2: SATA max UDMA/133 abar m2048@0x8c246000 port 0x8c246180 irq 123
[ 0.562641] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.562648] ehci-pci: EHCI PCI platform driver
[ 0.562663] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.562668] ohci-pci: OHCI PCI platform driver
[ 0.562677] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.562717] usbcore: registered new interface driver usbserial_generic
[ 0.562724] usbserial: USB Serial support registered for generic
[ 0.562840] rtc_cmos rtc_cmos: RTC can wake from S4
[ 0.564040] rtc_cmos rtc_cmos: registered as rtc0
[ 0.564270] rtc_cmos rtc_cmos: setting system clock to 2022-05-02T10:43:41 UTC (1651488221)
[ 0.564287] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.564669] intel_pstate: Intel P-state driver initializing
[ 0.565281] intel_pstate: HWP enabled
[ 0.565331] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.565634] hid: raw HID events driver (C) Jiri Kosina
[ 0.565684] intel_pmc_core INT33A1:00: initialized
[ 0.565768] drop_monitor: Initializing network drop monitor service
[ 0.565836] Initializing XFRM netlink socket
[ 0.565927] NET: Registered PF_INET6 protocol family
[ 0.568773] Segment Routing with IPv6
[ 0.568777] RPL Segment Routing with IPv6
[ 0.568786] In-situ OAM (IOAM) with IPv6
[ 0.568810] NET: Registered PF_PACKET protocol family
[ 0.569397] microcode: sig=0x806ec, pf=0x80, revision=0xec
[ 0.569567] microcode: Microcode Update Driver: v2.2.
[ 0.569572] IPI shorthand broadcast: enabled
[ 0.569583] sched_clock: Marking stable (564534108, 4815393)->(573225795, -3876294)
[ 0.569701] registered taskstats version 1
[ 0.570227] Loading compiled-in X.509 certificates
[ 0.574250] Loaded X.509 cert 'Build time autogenerated kernel key: 7f41f35378b3c717a102f08fd4e92b051d09de5a'
[ 0.574622] zswap: loaded using pool lz4/z3fold
[ 0.574885] Key type ._fscrypt registered
[ 0.574888] Key type .fscrypt registered
[ 0.574890] Key type fscrypt-provisioning registered
[ 0.576091] PM: Magic number: 6:885:728
[ 0.576278] RAS: Correctable Errors collector initialized.
[ 0.875437] ata2: SATA link down (SStatus 4 SControl 300)
[ 0.875588] ata1: SATA link down (SStatus 4 SControl 300)
[ 0.877051] Freeing unused decrypted memory: 2036K
[ 0.877497] Freeing unused kernel image (initmem) memory: 1768K
[ 0.877502] Write protecting the kernel read-only data: 22528k
[ 0.878195] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 0.878558] Freeing unused kernel image (rodata/data gap) memory: 1500K
[ 0.896429] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.896436] rodata_test: all tests were successful
[ 0.896443] Run /init as init process
[ 0.896446] with arguments:
[ 0.896448] /init
[ 0.896451] with environment:
[ 0.896453] HOME=/
[ 0.896455] TERM=linux
[ 0.896457] BOOT_IMAGE=/vmlinuz-linux-tanureal
[ 1.012118] sdhci: Secure Digital Host Controller Interface driver
[ 1.012124] sdhci: Copyright(c) Pierre Ossman
[ 1.013482] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.013491] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.014564] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[ 1.014716] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[ 1.014721] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.014725] usb usb1: Product: xHCI Host Controller
[ 1.014728] usb usb1: Manufacturer: Linux 5.18.0-rc5-tanureal-00021-g2779a3961023-dirty xhci-hcd
[ 1.014731] usb usb1: SerialNumber: 0000:00:14.0
[ 1.014821] hub 1-0:1.0: USB hub found
[ 1.014839] hub 1-0:1.0: 12 ports detected
[ 1.016228] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.016234] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.016238] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.016272] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
[ 1.016277] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.016280] usb usb2: Product: xHCI Host Controller
[ 1.016283] usb usb2: Manufacturer: Linux 5.18.0-rc5-tanureal-00021-g2779a3961023-dirty xhci-hcd
[ 1.016287] usb usb2: SerialNumber: 0000:00:14.0
[ 1.016366] hub 2-0:1.0: USB hub found
[ 1.016377] hub 2-0:1.0: 6 ports detected
[ 1.016561] usb: port power management may be unreliable
[ 1.020388] sdhci-pci 0000:00:1a.0: SDHCI controller found [8086:9dc4] (rev 30)
[ 1.021185] mmc0: CQHCI version 5.10
[ 1.021283] mmc0: SDHCI controller on PCI [0000:00:1a.0] using ADMA 64-bit
[ 1.108631] mmc0: Command Queue Engine enabled
[ 1.108647] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[ 1.119323] mmcblk0: mmc0:0001 DA4064 58.2 GiB
[ 1.122637] mmcblk0: p1 p2
[ 1.123065] mmcblk0boot0: mmc0:0001 DA4064 4.00 MiB
[ 1.123718] mmcblk0boot1: mmc0:0001 DA4064 4.00 MiB
[ 1.124334] mmcblk0rpmb: mmc0:0001 DA4064 16.0 MiB, chardev (237:0)
[ 1.265060] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[ 1.410931] usb 1-4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.11
[ 1.410938] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.410940] usb 1-4: Product: USB Receiver
[ 1.410942] usb 1-4: Manufacturer: Logitech
[ 1.416831] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046D:C52B.0001/input/input3
[ 1.417101] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[ 1.472175] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-4/input0
[ 1.474629] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C52B.0002/input/input4
[ 1.474887] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C52B.0002/input/input5
[ 1.478443] tsc: Refined TSC clocksource calibration: 1800.003 MHz
[ 1.478461] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f22c73312, max_idle_ns: 440795259572 ns
[ 1.478561] clocksource: Switched to clocksource tsc
[ 1.528624] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C52B.0002/input/input6
[ 1.529115] hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-4/input1
[ 1.531069] hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input2
[ 1.531140] usbcore: registered new interface driver usbhid
[ 1.531147] usbhid: USB HID core driver
[ 1.535024] usb 1-8: new full-speed USB device number 3 using xhci_hcd
[ 1.676564] usb 1-8: New USB device found, idVendor=0483, idProduct=5740, bcdDevice= 2.00
[ 1.676570] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.676572] usb 1-8: Product: STM32 Virtual ComPort
[ 1.676574] usb 1-8: Manufacturer: STMicroelectronics
[ 1.676575] usb 1-8: SerialNumber: 5D7E21893537
[ 1.820798] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.
[ 1.823165] fuse: init (API version 7.36)
[ 1.848037] systemd-journald[266]: Received client request to flush runtime journal.
[ 2.100468] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 2.101743] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 2.107574] intel_pch_thermal 0000:00:12.0: enabling device (0000 -> 0002)
[ 2.118465] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.118721] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 2.118786] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 2.118953] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002)
[ 2.119929] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 2.123802] i2c i2c-0: 2/2 memory slots populated (from DMI)
[ 2.124082] dca service started, version 1.12.1
[ 2.130220] e1000e: Intel(R) PRO/1000 Network Driver
[ 2.130227] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.130260] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
[ 2.133456] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.138895] intel-lpss 0000:00:19.2: enabling device (0000 -> 0002)
[ 2.139453] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.151626] igb: Intel(R) Gigabit Ethernet Network Driver
[ 2.151633] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 2.154555] cdc_acm 1-8:1.0: ttyACM0: USB ACM device
[ 2.159287] usbcore: registered new interface driver cdc_acm
[ 2.159293] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.171998] Error: Driver 'pcspkr' is already registered, aborting...
[ 2.174399] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 2.174405] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 2.174407] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 2.174410] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 2.174412] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 2.174414] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 2.180751] pps pps0: new PPS source ptp0
[ 2.180788] igb 0000:01:00.0: added PHC on eth0
[ 2.180791] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 2.180794] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:07:32:81:b6:4d
[ 2.180799] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
[ 2.180802] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 2.183094] cryptd: max_cpu_qlen set to 1000
[ 2.202318] snd-soc-dummy snd-soc-dummy: ASoC: dynamically register DAI snd-soc-dummy
[ 2.202328] snd-soc-dummy snd-soc-dummy: ASoC: Registered DAI 'snd-soc-dummy-dai'
[ 2.211537] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 2.212103] iTCO_vendor_support: vendor-support=0
[ 2.212589] igb 0000:01:00.0 enp1s0: renamed from eth0
[ 2.212801] AVX2 version of gcm_enc/dec engaged.
[ 2.212834] AES CTR mode by8 optimization enabled
[ 2.222628] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 2.223775] intel_rapl_common: Found RAPL domain package
[ 2.223780] intel_rapl_common: Found RAPL domain core
[ 2.223783] intel_rapl_common: Found RAPL domain uncore
[ 2.223786] intel_rapl_common: Found RAPL domain dram
[ 2.223788] intel_rapl_common: Found RAPL domain psys
[ 2.224774] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[ 2.225146] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 2.225443] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.229832] cs42l43 IRQ 132
[ 2.230127] cs42l43 i2c-CSC4243:00: supply VDD_P not found, using dummy regulator
[ 2.230319] cs42l43 i2c-CSC4243:00: supply VDD_D not found, using dummy regulator
[ 2.230334] cs42l43 i2c-CSC4243:00: supply VDD_A not found, using dummy regulator
[ 2.230348] cs42l43 i2c-CSC4243:00: supply VDD_IO not found, using dummy regulator
[ 2.230366] cs42l43 i2c-CSC4243:00: supply VDD_CP not found, using dummy regulator
[ 2.232287] cs42l43 i2c-CSC4243:00: Security disabled, disable MCU directly
[ 2.233475] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 2.238512] cs42l43 i2c-CSC4243:00: Configured IRQ 132 with flags 0x2008
[ 2.281778] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 00:07:32:81:b6:4c
[ 2.281794] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 2.281879] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF
[ 2.283281] e1000e 0000:00:1f.6 eno1: renamed from eth0
[ 2.296881] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 2.310121] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.310710] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[ 2.317875] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 2.341818] cs42l43 i2c-CSC4243:00: ASoC: dynamically register DAI i2c-CSC4243:00
[ 2.341826] cs42l43 i2c-CSC4243:00: ASoC: Registered DAI 'cs42l43-asp'
[ 2.341828] cs42l43 i2c-CSC4243:00: ASoC: dynamically register DAI i2c-CSC4243:00
[ 2.341830] cs42l43 i2c-CSC4243:00: ASoC: Registered DAI 'cs42l43-dp1'
[ 2.341832] cs42l43 i2c-CSC4243:00: ASoC: dynamically register DAI i2c-CSC4243:00
[ 2.341833] cs42l43 i2c-CSC4243:00: ASoC: Registered DAI 'cs42l43-dp2'
[ 2.341835] cs42l43 i2c-CSC4243:00: ASoC: dynamically register DAI i2c-CSC4243:00
[ 2.341837] cs42l43 i2c-CSC4243:00: ASoC: Registered DAI 'cs42l43-dp3'
[ 2.341838] cs42l43 i2c-CSC4243:00: ASoC: dynamically register DAI i2c-CSC4243:00
[ 2.341840] cs42l43 i2c-CSC4243:00: ASoC: Registered DAI 'cs42l43-dp4'
[ 2.341841] cs42l43 i2c-CSC4243:00: ASoC: dynamically register DAI i2c-CSC4243:00
[ 2.341843] cs42l43 i2c-CSC4243:00: ASoC: Registered DAI 'cs42l43-dp5'
[ 2.341845] cs42l43 i2c-CSC4243:00: ASoC: dynamically register DAI i2c-CSC4243:00
[ 2.341846] cs42l43 i2c-CSC4243:00: ASoC: Registered DAI 'cs42l43-dp6'
[ 2.341848] cs42l43 i2c-CSC4243:00: ASoC: dynamically register DAI i2c-CSC4243:00
[ 2.341850] cs42l43 i2c-CSC4243:00: ASoC: Registered DAI 'cs42l43-dp7'
[ 2.341854] cs42l43 i2c-CSC4243:00: Successfully probed, devid: 0x042a43, rev: 0xa0
[ 2.370146] intel_tcc_cooling: Programmable TCC Offset detected
[ 2.519719] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input2
[ 2.634431] input: Logitech Wireless Device PID:4055 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0003/0003:046D:4055.0004/input/input9
[ 2.634955] hid-generic 0003:046D:4055.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Wireless Device PID:4055] on usb-0000:00:14.0-4/input2:1
[ 2.636820] input: Logitech Wireless Device PID:4076 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0003/0003:046D:4076.0005/input/input13
[ 2.637276] hid-generic 0003:046D:4076.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4076] on usb-0000:00:14.0-4/input2:2
[ 2.662904] mousedev: PS/2 mouse device common for all mice
[ 2.781634] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0003/0003:046D:4055.0004/input/input17
[ 2.782000] logitech-hidpp-device 0003:046D:4055.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:14.0-4/input2:1
[ 2.935791] input: Logitech K540/K545 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0003/0003:046D:4076.0005/input/input18
[ 2.936205] logitech-hidpp-device 0003:046D:4076.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K540/K545] on usb-0000:00:14.0-4/input2:2
[ 3.396423] i915 0000:00:02.0: [drm] failed to retrieve link info, disabling eDP
[ 3.403351] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 3.405387] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.405698] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input19
[ 3.405883] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 3.530283] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
[ 3.532443] snd_hda_intel 0000:00:1f.3: display power enable
[ 3.532454] snd_hda_intel 0000:00:1f.3: enable codec wakeup
[ 3.535072] snd_hda_intel 0000:00:1f.3: disable codec wakeup
[ 3.536671] snd_hda_intel 0000:00:1f.3: Capability version: 0x0
[ 3.536681] snd_hda_intel 0000:00:1f.3: HDA capability ID: 0x2
[ 3.536686] snd_hda_intel 0000:00:1f.3: Found ML capability
[ 3.536692] snd_hda_intel 0000:00:1f.3: Capability version: 0x0
[ 3.536696] snd_hda_intel 0000:00:1f.3: HDA capability ID: 0x3
[ 3.536699] snd_hda_intel 0000:00:1f.3: Found PP capability offset=800
[ 3.536708] snd_hda_intel 0000:00:1f.3: Capability version: 0xf
[ 3.536712] snd_hda_intel 0000:00:1f.3: HDA capability ID: 0xfff
[ 3.536715] snd_hda_intel 0000:00:1f.3: Invalid capability reg read
[ 3.536859] snd_hda_intel 0000:00:1f.3: enable codec wakeup
[ 3.544057] snd_hda_intel 0000:00:1f.3: codec_mask = 0x4
[ 3.544083] snd_hda_intel 0000:00:1f.3: disable codec wakeup
[ 3.577668] snd_hda_intel 0000:00:1f.3: display power enable
[ 3.578348] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 3.578535] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 3.578679] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[ 3.578797] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[ 3.578909] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[ 3.579101] snd_hda_intel 0000:00:1f.3: display power disable
[ 3.658809] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
[ 3.785300] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
[ 5.539952] e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 5.540029] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 6.649708] snd_hda_intel 0000:00:1f.3: display power disable
[ 6.651299] snd_hda_intel 0000:00:1f.3: display power disableStill no sign of DSP or SSP2
Sorry @lucastanure I can't follow what you are doing.
[ 3.544057] snd_hda_intel 0000:00:1f.3: codec_mask = 0x4says you have disabled the HDaudio codec on board, or enabled an Advanced Audio Mode. please go back to the BIOS menu and check what you've modified compared to the default settings.
no update->closing
- added a commit that references this issue
on May 5, 2026
Hi,
We are trying to use the I2S bus from the 40 pin header on Up Xtreme I5 whiskey lake, but the Intel CPU follows a path in the Linux kernel source where it says the CPU doesn't have DSP and can't expose an I2S from that.
The driver sound/soc/intel/skylake/skl.c starts and calls the function snd_intel_dsp_driver_probe. And that function returns on this point:
/*
*/
if (pci->class == 0x040300)
return SND_INTEL_DSP_DRIVER_LEGACY;
I can see in the BIOS v1.9 (https://downloads.up-community.org/download/up-xtreme-uefi-bios-v1-9/) that the SSP2 is enabled.
So, as the spec ( https://up-board.org/wp-content/uploads/up-xtreme/Datasheet-UP-xtreme.pdf) says that this board supports the SSP2 in the 40 pin header.
The board in use is:
UPX-WHLI5-A20-08064
Serial number C20C03343
Questions:
Thanks
Lucas Tanure