Center geometry for gcode

[ahmed2007]

Dear all,
I tried to center the geometry for HPGL and it is working well, using the option "--center" or "layout".

However i can't have the same option with gcode. So can i have my geometry center with gcode ? is there any option for gwrite ? or am i missing something in the difinition of my profile in the .tom file.
I left here the profile i created:

[gwrite.gcodemmahmed]
document_start = "G17\nG71\nG90\n"
segment_first = "SC_TOOL[0]\nG0 X{x:.4f} Y{y:.4f}\n"
segment = "SC_TOOL[1]\nG1 X{x:.4f} Y{y:.4f}\n"
document_end = "G0 X0 Y0\nM2\n"
unit = "mm"
vertical_flip = true
info= "This gcode profile is correctly inverted across the y-axis"
offset_x = 0
offset_y = 0

Thank you guys!

[emmano3h]

Have you tried vertical_flip = false ?

[ahmed2007]

Yes, i tried vertical_flip = false, and that will only flip my geometry and does not center it.

[emmano3h]

Sorry then! Maybe somebody here can help you .... @theomega or @jmpinit or @tatarize

[tatarize]

invert_x: Flip all points right-to-left without changing the position within the document.
invert_y: Flip all points top-to-bottom without changing the position within the document.

This was previously noted. The vertical flip makes all Y into -Y. When what you actually want is the document unmoved and flipped in place. That's what invert_y = true should give you.

[ahmed2007]

Thank you tartize, actually i don't want to flip my document, what i want is to have my document centered in my paper, that is to say the document moved to the center. As i say in my issue description, i got the document centred with vpype using the option "--center" to have HPGL, is there a way to have the same thing with gcode ?
Thanks a lot !

[tatarize]

So you just want to translate the design? Seems like there's a bunch of commands in vpype for that. At least if you know the size... @abey79 is there a --center that exists outside the write routine or does he need to check the stats and do it manually?

[tatarize]

Apparently something like %vp_page_width.h/2% will let you do that sort of stuff and evaluate it.

I think if you do translate %vp_page_width.w/2% or something or other you can center it. There's currently not a thing to do that built into vpype-gcode and seems like that stuff should be doable in vpype proper, especially with the evaluation stuff.